Wall cabinets and TVs on concrete, gypsum or masonry walls: finds the anchors that hold them, with a 3D view and a report.
The program runs online in your browser. Your project files are saved on your own computer.
It runs in your browser. Nothing is installed.
What HOMESOFT does
Checks whether a wall cabinet, or a TV on a fixed, tilt or arm mount, will hold on its wall anchors.
Gives pass or fail with a utilisation per check, the governing value, and a 3D view showing failing anchors in red.
Checks tension and shear of the top anchor, combined tension and shear, back-panel pull-through and the required anchor length.
Walls offered: reinforced concrete, gypsum board lining on concrete, and European clay, sand-lime, concrete and aerated concrete masonry units.
Anchors offered: concrete screws, a wedge anchor, approved anchors set with injection resin and threaded rod, and nylon plugs.
Includes a dynamic factor, an optional child-safety load, and Find solution and Optimize solution buttons.
Results are indicative values for homeowners, not an engineering result, and do not replace an approved engineering design.
Who it is for
Homeowners, installers and shops choosing an anchor for a kitchen cabinet, shelf unit or TV.
Structural fastenings, such as base plates or anchors under design loads, belong in AAS rather than HOMESOFT.
Files
Saves and opens your design as a .json project file and exports an A4 PDF report.
Norms used by this program
Standards (20)EOTA TR 064 - Design of plastic anchors (2022-12)EN 1992-4 - Design of fastenings for use in concrete (2018)EOTA TR 054 - Design methods for anchorages with metal injection anchors in masonry (2016)ETAG 020 Annex C - Plastic anchors, design methods (2006, amended 2012)EAD 330747-00-0601 - Fasteners in concrete for redundant non-structural systemsEAD 330284-00-0604 - Plastic anchors for redundant non-structural systems in concrete a…EAD 330232 - Mechanical fasteners for use in concrete (01-0601 / 02-0601)EAD 330499-02-0601 - Bonded fasteners for use in concrete (2022)+12 moreShow fewer
EAD 330076-00-0604 - Metal injection anchors for use in masonry (2014)ETA-12/0261 - plastic anchor for use in masonry (CSTB) (2015-12-08)ETA-14/0467 - plastic frame anchor Ø8 / Ø10 (IETcc) (version 4, 2025-03-26)ETA-19/0496 - injection system for masonry (ETA-Danmark) (2019-08-19)ETA-18/0814 - injection system for masonry (ETA-Danmark) (2018-10-22)ETA-20/0046 - concrete screws (2026, version 8)ETA-05/0242 - wedge anchor (current revision)ETA-15/0008 - injection system for concrete (current revision)EN 14749 - Domestic and kitchen storage units - Safety requirements and test methods (2…IEC 62368-1 - Audio/video, information and communication technology equipment - Safety …EN 771-1 / -2 / -3 / -4 - Specification for masonry units (clay, calcium silicate, aggr…EN 206 - Concrete: specification, performance, production and conformity (2013 + A2:2021)
Questions about this program? Ask the AI agent (the ✨ button, bottom right).
Questions about HOMESOFT
Is HOMESOFT free?
Yes. HOMESOFT is free to use online, with no registration, no trial period and no locked features.
Do I need to install HOMESOFT?
No. HOMESOFT runs in your web browser on a computer, tablet or phone, and is always up to date. Your project files are saved on your own computer, not on our servers.
Which standards does HOMESOFT use?
This version of HOMESOFT uses 20 standards, among them EOTA TR 064 - Design of plastic anchors (2022-12), EN 1992-4 - Design of fastenings for use in concrete (2018), EOTA TR 054 - Design methods for anchorages with metal injection anchors in masonry (2016). The full list is shown above.
Can HOMESOFT share a project with other ADIT programs?
It exchanges data with other programs by file.
ADIT AI agent
Free · always on
Hello! Ask me which program fits your project, or how a norm applies.
Answers about the programs and this website only. Please do not type personal or confidential data: messages are processed by an AI provider and are not stored by this site.