← Home

Engineering guides

Practical guides to structural and fastening design: the method, a worked example with numbers, and the free program that does the calculation.

Anchor design to EN 1992-4, step by step How a post-installed anchor in concrete is checked to EN 1992-4: the failure modes, the formulas, and a worked example of a bonded M12 anchor in tension. Pallet racking design to EN 15512, step by step How adjustable pallet racking is checked to EN 15512: loads and placement loads, partial factors, beams and connectors, uprights in a second-order analysis, and a worked example of a beam pair. Wind load on a pergola or canopy to EN 1991-1-4, step by step How wind acts on a pergola roof: the peak velocity pressure, the canopy force coefficients of EN 1991-1-4, and a worked example that shows why uplift governs the posts and anchors. Post-installed rebar: anchorage length step by step (EN 1992-1-1) How long a starter bar bonded into existing concrete must be: the EN 1992-1-1 anchorage and lap formulas with the bond strength of the ETA, and a worked example for a Ø16 bar.